If using a scan tool to turn off the check engine light, follow manufacturers directions. You will need to find your vehicle’s OBD II Data Link Connecter (DLC) and connect your scan tool to the DLC, then follow the steps indicated on your scan tool or scan tool manual.
Mar 20, 2012 · The first and easiest method for clearing the check engine light is driving and time. Most onboard computers will recheck whatever problem caused the check engine light to activate multiple times. Drive your car as you normally would.
Jul 23, 2013 · how to reset check engine light works on any trucks cars suv mazda ford gm honda toyota chevy and what diagnostic tester meter tools used to reset warning lamp is obd2 scanner to buy see links
The light would be out, and you would be good to go. However this can mask a problem that wasn’t fixed, cause your radio not to work. On very new vehicles, this won’t erase the check engine light at all causing you to think there is still a problem. The safest, and best, way to turn off the light…
Using a scan tool is the easiest way for check engine light reset. If you wonder to know how to turn off check engine light by this way, here are 3 steps for you. Step 1: Connect the scan tool to the OBD – II. Connecting the scan tool to the OBD- II ( On- board diagnostic connector) under your steering column.
Step 1. Connect the code reader and then turn the key to the on position without starting the engine. Using the command buttons on the reader tool follow the prompt and choose the “erase codes” or “clear codes” option from the tool’s LED screen and hit enter. The tool will ask you if you are sure you want to erase the codes, push yes.
Step 3: Proceed to the clearing or erasing menu on the scan tool. Follow the prompts on the scan tool’s screen to get to the menu. Step 4: Erase or clear the codes. Step 5: Remove the scan tool and test drive the vehicle. If the Check Engine Light comes back on, then there is still an issue with your car.