Dec 15, 2018 · Put on a pair of rubber or disposable gloves. Use a small cup or bucket to remove excess water at the brim of the bowl. Pour the water into a sink if it’s clean or a plastic bucket if it is dirty. Once the flood is remedied, pour the dirty water back into the toilet and reflush it for safe disposal.
How to Stop an Overflowing Toilet. Once you’ve got the flapper valve secured, stop the tank from filling by lifting up on the float that operates the tank fill valve. With the main water supply cut off, the water level in the bowl should start to drop slowly. If after about a …
Take off the toilet tank lid – Quickly but carefully, remove the lid from the toilet tank and set it aside. You can place the toilet tank lid right across the toilet bowl. Don’t knock the lid on the floor – they break. Don’t waste time moving towels and stuff – we’re in a rush to stop the toilet from overflowing.
Step 1 – Remove the Toilet TankLid. When you are ready to begin, turn off the water supply which provides water for filling the tank. This is usually done by turning off a small knob just below the tank. Turn it clockwise to turn off the water. You may also turn off the main water supply outside if you cannot find or reach this water overflow knob.
Toilet Shutoff Valve. The most effective way to stop a toilet from overflowing is to cut off the supply of water to the toilet. There’s a small hand-crank valve near the bottom of your toilet where the main water line leaves your toilet and heads into the wall or floor. When you notice the water starting to rise, there’s no time to waste.
Related To: Take the lid off the tank, and push the flapper down to stop more water from entering the bowl. Then turn off the water supply behind and at the bottom of the toilet. After the water is turned off, try using a conventional plunger to unclog the toilet. If a plunger doesn’t do the trick, use a toilet auger.